1 | Ferrous Materials | Attracted by magnet and can be magnetized |
Eg. iron, steel, nickel and cobalt |
2 | Non-ferrous materials | Not attracted by magnet and cannot be magnetized |
copper, silver, aluminum, wood, glass |
3 | Electric field intensity | force exerted by the field on a unit charge placed at a point around another charge | E is the electric field intensity in N/C
|
4 | Current: Rate of flow of charges in a conductor |
I is the current in amperes (A), Q is the charge in coulombs (C) t is the time in seconds (s) |
|
5 | Current | In circuits the current always choose the easiest path | |
6 | Ohms law | Voltage across the resistor is directly proportional to current, V⋉ I or |
V is the voltage in volts (V), I is the current in amperes (A) and R is resistance in ohms (Ω) |
7 | Voltage | Energy per unit charge
|
Q is the charge in coulombs (C), V is the voltage in volts (V) Energy is in joules (J) |
8 | E.M.F. Electromotive force |
e.m.f. = lost volts + terminal potential difference EMF=Ir+IR |
|
9 | Resistance and resistivity |
ρ is the resistivity of resistor in Ω.m |
R is the resistance a resistor, L is the length of a resistor in meters A is the area of cross-section of a resistor in |
10 | Circuit | In series circuit→ the current stays the same and voltage divides In parallel circuit → the voltage stays the same and current divides |
|
11 | Resistance in series | ܴ R = R1 + R2 + R3 | R, R1, R2 and R3 are resistances of resistor in ohms |
12 | Resistance in parallel | R, R1, R2 and R3 are resistances of resistor in ohms | |
13 | Potential divider | ||
14 | Potential divider | ||
15 | Power | P is the power in watts (W) | |
16 | Power | The unit of energy is joules (J) | |
17 | Transformer | ||
18 | Transformer | Power of primary coil = power of secondary coil
Ip is the current in primary coil and Is the current in secondary coil |
|
19 | Cathode rays | Stream of electrons emitted from heated metal (cathode). This process is called thermionic emission. |